Humans of all ages like music, but you can’t exactly pass a toddler the aux cable. That’s not to say the younger set don’t have their own particular tastes– they absolutely do, and they absolutely love to take control and inflict them on the rest of us. [nbr23] has a toddler who loves both music and tactile controls, and decided to combine the two for them with a project he calls Radio-Gaga, which is a gutted Panasonic radio that calls up tunes via Home Assistant.

Interestingly enough the radio is now just a remote control– the speaker has been removed along with the rest of the radio hardware. The buttons and dials are still there, though, letting the toddler control what tunes are on offer and at what volume via couple of potentiometers hooked to an ESP32. The sound itself is being served up from the homelab to a USB speaker. There’s one notable flaw with this architecture: if the batteries die on the remote, “Let it Go” does not until an adult intervenes manually or recharges the remote.

One interesting lesson [nbr23] wanted to share was that he was able to improve an unsatisfactorily slow startup time by assigning the device a static IP on his network– apparently the single longest step in getting the tunes going was negotiating a DHCP lease. Skipping that gets the tunes playing in under a second, which is fast enough even for the most impatient of tiny humans.

If you prefer a more self-contained device, we’ve seen toddler jukeboxes that keep storage and speaker built-in, many with NFC control. 

Online publications sometimes work with sponsors. Over at the Autopian, they landed a sponsorship deal with eBay, but due to an unguarded comment, fulfilling the sponsor’s requirements turned out to be something of a handful. Build a brand-new, completely WW2-spec Jeep using only parts sourced from the auction site, and drive it to Moab for an event. [David Tracy] set to work, and the resulting write-up is a build of epic proportions.

Of course, many Jeeps have been built since the war, not least by Willys and its successors, but also by enthusiasts. You can even buy a modern-day visible derivative of the original made in America by the Indian company Mahindra, which has been licensed to build Jeeps since the 1940s. So his claim of making the first new WW2-spec Jeep since the war may be difficult to substantiate, but it’s certain that his attention to period detail is exceptional. For example, most people would either use a more modern engine or find a second-hand original. Instead, he sources a brand new block from France and builds a new engine from scratch. And is that the infamously flawed early Jeep steering system we spy? The vehicle uses second-hand parts for other major drive train components, but the chassis and body are made in the Philippines.

An early Jeep is a simple vehicle, but following his build, you realise the power of the manufacturing industry, as so many individual parts and assemblies must come together to make the finished machine. Some of us have had old cars in our lives, so we appreciate this very well. The moment of completion comes with very little testing time to spare, and he’s off on the long drive from LA to Moab. That in itself could make an epic write-up, and yet again, we recognise the combination of willpower and worry. All of this has made us idly want one of these wildly impractical but seductive vehicles, but we know it will pass. If you aren’t interested in authenticity, you can always meld a Jeep with a Prius.

No description available.

This item belongs to: texts/popularelectronicsmagazine.

This item has files of the following types: Archive BitTorrent, Comic Book ZIP, DjVuTXT, Djvu XML, Item Tile, Metadata, OCR Page Index, OCR Search Text, Page Numbers JSON, Scandata, Single Page Processed JP2 ZIP, Text PDF, chOCR, hOCR

No description available.

This item belongs to: texts/manuals_omega.

This item has files of the following types: Archive BitTorrent, DjVuTXT, Djvu XML, Item Tile, Metadata, OCR Page Index, OCR Search Text, Page Numbers JSON, Scandata, Single Page Processed JP2 ZIP, Text PDF, chOCR, hOCR

As good as a desktop OS may be, at some point it has to feature accelerated 3D graphics. This has been a bit of a sticking point for Haiku OS, as none of the big names in GPU cards are likely to start putting out drivers for this OS any time soon. Fortunately there is the Linux open source driver code from Nvidia that can be used as a jumping-off point for a port, which is what [X512] and the community over at the Haiku forums did over the course of more than a year.

In a recent video [Action Retro] takes a poke at the fruits of these efforts, trying out the driver with an RTX2070 Super GPU. Of note is that this driver requires the GSP (GPU System Processor) controller that got added by Nvidia with the Turing series of GPUs, meaning that you need at least a GTX16 or RTX20 series card.

You can get an installation package from the GitHub repository, such as for the v0.0.2 pre-release that was created in January of 2026. In this pre-release state quite a few things are working, with the ability to play 3D games at a reasonable FPS being the biggest improvement over plain VESA mode. Features like CUDA are not available as they’re not in the open sourced section, of course.

In the [Action Retro] video the whole installation process is demonstrated, starting with a fresh nightly Haiku build. First the gaming performance in software-rendered VESA mode is demonstrated before the GPU driver is installed. This shows a marked improvement in performance, although Minecraft needs to be updated for the newest Mesa library that omits OSMesa, so that couldn’t be tested. Overall it shows that Haiku has made another massive leap forward in becoming a viable daily driver OS.

Meanwhile, over on the ReactOS side of things we just saw a Half-Life 2 playthrough by [Aotori Hibiki], on an Intel Sandy Bridge PC with GeForce 8400GS graphics. Here ReactOS has the advantage of being Windows NT-compatible, including WDDM-style GPU drivers, allowing it to use the same drivers as Windows. Simultaneously, ReactOS is now implementing its first NT6 kernel API calls to make it compatible with modern  (Vista+) Windows.

The upshot here is that for people who want to daily drive an open source OS with all the creature comforts imaginable, things have never seemed more promising. Especially for people who don’t want Yet Another Linux Distro but just an utterly boring desktop-centric, single-user focused OS that Just Works these are great tidings.

No description available.

This item belongs to: texts/manuals-motorola.

This item has files of the following types: Abbyy GZ, Animated GIF, Archive BitTorrent, DjVu, DjVuTXT, Djvu XML, Item Tile, Metadata, Scandata, Single Page Processed JP2 ZIP, Text PDF

IC Datasheet: XILINXXC2018LCA.

This item belongs to: texts/ic_datasheets.

This item has files of the following types: Abbyy GZ, Animated GIF, Archive BitTorrent, DjVu, DjVuTXT, Djvu XML, Item Tile, Metadata, Scandata, Single Page Processed JP2 ZIP, Text PDF

Sold by German DIY store OBI, the OBI Energy Tracker is a €15 set of two devices, one of which you essentially stick on top of your existing electricity meter. This then allows for electricity usage to be measured and tracked, with the data sent to the second, gateway device. This latter cloud-bound device is linked to an OBI account via the heyOBI app. This correspondingly called for the gateway device to be reverse-engineered and freed from its cloud-based shackles, a task that [Aaron Christophel] happily took upon himself.

The whole process is also covered in two videos, with the first providing all the essentials on reprovisioning the original firmware for a local MQTT server in English, while the second, German-language video focuses on custom firmware for the ESP32-C3 inside of the gateway device.

Inside the reader device is a Cortex-M0+-based BAT32G135 MCU that communicates with the meter via its IR protocol. This is then communicated via 868 MHz LoRa to the gateway device that will be placed somewhere within Wi-Fi reach by the user. Inside this latter device is as mentioned the ESP32-C3, which by default runs firmware that communicates via secure MQTT with an AWS cloud instance for the typical cloud-based shenanigans.

The aforementioned reprovisioning option doesn’t require firmware flashing, just a handful of steps to follow. This involves fetching the 32-bit TEA key, generating your own PKI, running your own MQTTS-capable broker and having the provided Python script handle the rest from there.

Flashing custom firmware is the other option, with straightforward UART/JTAG reflashing sadly disabled by the manufacturer. With the effort required here you could perhaps argue that simply connecting the reader device to a custom gateway device might be a lot easier, especially if you already have a LoRa transceiver and associated hardware.

No description available.

This item belongs to: texts/manuals_omega.

This item has files of the following types: Archive BitTorrent, DjVuTXT, Djvu XML, Item Tile, Metadata, OCR Page Index, OCR Search Text, Page Numbers JSON, Scandata, Single Page Processed JP2 ZIP, Text PDF, chOCR, hOCR

Mini Static 2020-04-11 n03.

This item belongs to: texts/sierra-nevada-ars.

This item has files of the following types: Archive BitTorrent, DjVuTXT, Djvu XML, Item Tile, Metadata, OCR Page Index, OCR Search Text, Page Numbers JSON, Scandata, Single Page Processed JP2 ZIP, Text PDF, chOCR, hOCR

VeeCAD takes a schematic generated netlist and assists you to build a layout – but on stripboard (Veroboard). The usual design tools are provided: netlist import, component footprint definition, component positioning, wiring and connectivity check.

.